All-Spray Pre-Spray 10lb Box

$59.95

All-Spray Carpet Pre-Spray All-Spray 10 Pound Box Edition Now get twice the amount of All-Spray with 33% savings in our new box edition. Each box comes with a thick, zip lock bag packed with All-Spray Molecular Magic. Not your typical pre-spray – All-Spray delivers the power of a high-pH, soap-based cleaner without the damaging effects, at neutral pH of 8. All-Spray pre-spray turns water into a powerful dirt magnet without soap, caustic or toxic chemicals. Clean carpet, wool rugs, fine furniture, tile and natural stone without worry. From greasy restaurant carpet & tile to high-end wool & silk rugs -…

11 in stock

Description

All-Spray Carpet Pre-Spray

Unstoppable Benefits

  • HWE/VLM/Dry Compound
  • Fiber Stays Cleaner Longer
  • Destroys Grease & Grime
  • Residential/Commercial
  • No Sticky Soap Residue
  • No High pH Rapid Re-soiling
  • Acid Rinse Not Required
  • Leaves Fibers Soft & Fluffy 
  • Stops Wicking

Cleans Almost Anything

  • Cleans All Fibers
  • Wool, Cotton, Silk, Linen
  • Polyester, Nylon, Olefin, Viscose
  • Fine Rugs & Furniture  
  • Tile & Grout – Preserves Silt Layer!
  • Natural Stone, Travertine, Marble, etc.
  • Oily, Greasy Carpet & Floors 
  • Amazing Carpet Spotter
  • Consolidates Your Cleaners
  • Saves You Money & Shelf Space
  • Eliminates Chemical Errors
  • Simplifies Technician Training
  • Makes Your Job Easier, Faster, Safer

Wins Customer Loyalty

  • 100% Non-Toxic
  • Metal-Safe
  • StainGuard-Safe
  • Hypoallergenic 
  • Pet-Safe
  • VOC-Free

5 Quart Sprayer (1:8 tip): Add 8 to 10 scoops.
7 Quart Sprayer (1:8 tip): Add 12 to 14 scoops.
If No Tip (1:4), use half the amount listed above.

1 Gallon Sprayer: Add 1 to 2 scoops (2 to 4 ounces)

Hand Pump Sprayer (32 oz.): Add 1/2 to 1 scoop

Spotter: Add 1 to 1.5 scoops (2 to 3 oz.) to a quart of water

Hot Water Extraction & Very Low Moisture: Apply premixed All-Spray to the soiled area ensuring even and adequate coverage. Do not over-wet area. Allow 10-15 minute dwell time, agitate, then HWE or VLM bonnet extract.

Dry Compound Cleaner (Ultra Low Moisture): Add 1.5 scoops (3 oz.) to 16 ounces of water stirring until dissolved. Lightly mist fibers and gently brush in. When completely dry, dry vacuum area to extract encapsulated soils.

SDS

Submit your review
1
2
3
4
5
Submit
     
Cancel

Create your own review

Ur-OUT Pet Urine Odor Remover
Average rating:  
 1 reviews
 by Thomas Berton

I’ve been in the business for 43 years now. This product is the best I’ve come across to date.
I have been field testing and using non toxic materials before “green cleaning” entered the lexicon.
I successfully restored the filthiest polar white viscose rug you can imagine using this.
It was the first item I used it on. Blew the minds of all the folks in a rug cleaning FB page.
It’s delivered on everything I threw at it. Tile & Grout, cotton velvets, wool rugs, the nastiest residential wall to wall I’ve ever seen (just recently), and greasy diners, etc. You will NOT be disappointed!
Thomas Berton – The Green Janitor- Kingston, NY…

Thomas,

Thank you for great write-up on All-Spray! We’re incredibly excited about its effectiveness and versatility as well! Besides HWE and VLM, you can now use All-Spray as a dry compound cleaner! The instructions are on the new labels, but in short, you make a very stout mixture with water. Lightly spray the delicate fabric, carpet or fine rug. Allow to dry naturally or with a fan then vacuum out the dry, encapsulated soils. As professional cleaners, we can now clean just about any floor, fabric or textile using All-Spray!

Thanks again for letting others know about All-Spray!
Brandon

Additional information

Weight 80 oz
Dimensions 6 × 6 × 10 in

Reviews

There are no reviews yet.

Be the first to review “All-Spray Pre-Spray 10lb Box”

Your email address will not be published. Required fields are marked *

You may also like…

Related products